FREE SHIPPING!!  ON ALL DECALS & SIGN MAGNETS

YOUR WHOLESALER & RETAILER FOR WINDOW DECALS AND METAL SIGNS

APPLYING YOUR DECALS:

Step 1: Clean the surface where your about to install your decal. Make sure surface is clean and dry before continuing.

Step 2: Carefully separate the solid paper away from the decal, leaving the decal on the transfer paper. Be very careful not to let the decal touch itself or anything else.

Step 3: Position the decal over the area where you would like the decal installed, without touching the decal to the surface. Once in place, firmly press the decal against the surface. Smooth out the decal using a credit card, making sure to remove all air bubbles.

Step 4: Slowly peel back the clear transfer paper, leaving just the decal on the surface.

Not to worry, most bubbles will dissipate soon after applying it, within 2-3 weeks of sunlight. If you have a larger bubble, use a fine needle to pop the bubble and then smooth the area out so the bubble can escape

REMOVING YOUR DECALS:

To remove your existing decal, the easiest method is to heat the surface slightly using a hair dryer or heat gun. Once the surface is around 80-100 degrees in temp, simply take you finger nail and peel the decal back off the window surface. You may also use a knife blade but be very careful not to scratch the glass. If the decal leaves behind a sticky substance on your window, you can use a product call de-solv-it which be found at most local stores.

Need a custom quote?

www.decalsnsigns.com